The Cabinetmaker
Active member
WIA 2012
Information and Schedule
November 2nd and 3rd
This year their looks to be fewer venders than in years past, however with everyone that has volunteered, I believe the SAPFM area will be better than ever.
As a reminder if you are able to bring some of your work please do so.
Setup can start Thursday afternoon, and on Friday and Saturday you can arrive one hour before the show opens. Our area (the Mart) will be open from 9am till 6pm on both days. You may unload and enter through the loading docks in the rear.
As in years past Donna has volunteered to bring her work bench for all to use (Thank you Donna).
Ray will be putting together some platforms and tables to place furniture on in the gallery. George will bring in some tarps to cover them.
During some of our normal schedule demos a few members will be working on a shave horse and allowing guests to give it a try. David Wright will also be turning furniture parts off and on.
I would like everyone to keep our area clean and if your not busy keep an eye on the furniture and talk to people who might be interested in membership.
Thanks again to everyone that volunteered.
Charles
SCHEDUAL
FRIDAY the 2nd
9:00 to 10:30 Mary May - carving
10:30 to 11:30 Bob Compton - Windsor chairs
11:30 to 12:30 Jim Crammond - Hand planes
12:30 to 1:30 David Conley - Scrapers
1:30 to2:30 Donna Hill - Marquetry
2:30 to 3:30 Charlie Watson - Carving
3:30 to 4:30 David Conley - Chisel handles
4:30 to 6:00 Ray Schwanenderger - Carving a Carving a Windsor Seat
Saturday the 3rd
9:00 to 10:00 George Walker - Design and Layout of a Swan Neck Pediment
10:00 to 11:00 Craig Flaming - Carving a Panel
11:00 to 12:00 Donna Hill - Marquetry (maybe with her Chevalet )
12:00 to 1:00 Rob Millard - Hammer Veneering
1:00 to 2:00 David Conley - Scrapers
2:00 to 3:00 Jim Crammond - Planes
3:00 to 4:00 Brooke Smith - Carving a tray
4:00 to 5:00 Mary May - Carving
5:00 to 6:00 Ray Schwanenderger - Carving a Windsor Seat
Information and Schedule
November 2nd and 3rd
This year their looks to be fewer venders than in years past, however with everyone that has volunteered, I believe the SAPFM area will be better than ever.
As a reminder if you are able to bring some of your work please do so.
Setup can start Thursday afternoon, and on Friday and Saturday you can arrive one hour before the show opens. Our area (the Mart) will be open from 9am till 6pm on both days. You may unload and enter through the loading docks in the rear.
As in years past Donna has volunteered to bring her work bench for all to use (Thank you Donna).
Ray will be putting together some platforms and tables to place furniture on in the gallery. George will bring in some tarps to cover them.
During some of our normal schedule demos a few members will be working on a shave horse and allowing guests to give it a try. David Wright will also be turning furniture parts off and on.
I would like everyone to keep our area clean and if your not busy keep an eye on the furniture and talk to people who might be interested in membership.
Thanks again to everyone that volunteered.
Charles
SCHEDUAL
FRIDAY the 2nd
9:00 to 10:30 Mary May - carving
10:30 to 11:30 Bob Compton - Windsor chairs
11:30 to 12:30 Jim Crammond - Hand planes
12:30 to 1:30 David Conley - Scrapers
1:30 to2:30 Donna Hill - Marquetry
2:30 to 3:30 Charlie Watson - Carving
3:30 to 4:30 David Conley - Chisel handles
4:30 to 6:00 Ray Schwanenderger - Carving a Carving a Windsor Seat
Saturday the 3rd
9:00 to 10:00 George Walker - Design and Layout of a Swan Neck Pediment
10:00 to 11:00 Craig Flaming - Carving a Panel
11:00 to 12:00 Donna Hill - Marquetry (maybe with her Chevalet )
12:00 to 1:00 Rob Millard - Hammer Veneering
1:00 to 2:00 David Conley - Scrapers
2:00 to 3:00 Jim Crammond - Planes
3:00 to 4:00 Brooke Smith - Carving a tray
4:00 to 5:00 Mary May - Carving
5:00 to 6:00 Ray Schwanenderger - Carving a Windsor Seat