P
pearle
Guest
I'm making a series of Christmas presents inspired by <a href="http://www.flickr.com/photos/24804363@N00/4090880829/in/set-72157622772227696/">this box</a> and I have a question about gluing in the 1/4" banding on the box sides. My previous experience has been with 1/16" stringing and I've just glued the stringing in with Elmer's white glue with no clamping of any kind. Can I get by with the same process with the 1/4" wide banding, or do I need to clamp the banding into its groove (it fits tightly in the groove) after gluing until the glue dries? With 80 pieces to apply, it would be much easier to not clamp the banding, but I don't want it to come loose later.
Preston
Preston