Author Topic: Source for shrinkage information  (Read 2012 times)

Ken Johnson

  • Regional Chapter Coordinator
  • Forum Master
  • ***
  • Posts: 205
    • American Period Furniture
Source for shrinkage information
« on: April 03, 2009, 09:29:50 AM »
Some years ago Mack Headley gave us a copy of a page from a publication which provided information on radial and tangential shrinkage.  
Being an unmedicated OCD, I went on a quest to find a clean copy (since mine was hard to read due to many copy generations).

I found the publication and the exact pages.  In addition, I found it contained other interesting if not necessarily useful information.

I thought I would share this with you in case you have an interest or need.

I found that for me, chapter 1 was the most useful.

It is US Agricultural Manual 188.  It is available for download at:

http://www.fpl.fs.fed.us/documnts/usda/ah188/ah188.htm

Ken
« Last Edit: September 10, 2009, 08:05:47 PM by Mark Arnold »