The Society of American Period Furniture Makers

Tools and Techniques => Power Tools and Shop Safety => Topic started by: macchips4 on April 19, 2013, 11:51:20 PM

Title: Bryd cutter head on a jointer
Post by: macchips4 on April 19, 2013, 11:51:20 PM
I'm wondering how the byrd shelix head performs on a jointer? In the thickness Planer it will leave small "waves" that one can feel and see if held to light. Dos any one have issues with this type of surface on the jointer? edging, making glue joints? Is it a worth while upgrade on an 8 inch jointer or stay with straight knives?
Joe
Title: Re: Bryd cutter head on a jointer
Post by: Woodmolds on April 20, 2013, 09:55:54 AM
All insert heads leave slight "waves"(linear), which only show when held up to the light. Rarely can they even be felt. When used on a joiner for glue joints they have no effect on the quality of the glue surface or the integrity of the joint.

Insert heads will cut with less tear out, because of cutter geometry. They are easier to maintain, because it only takes a few minutes to change knives to a sharp edge and generally last longer because carbide will hold an edge longer than HSS.

Tony