David Conley
Well-known member
SAPFM – ORV Chapter,
1) We have a group reservation at the Courtyard Columbus-Worthington by Marriott Columbus, OH. The cutoff date for the hotel is October 7, 2022. It should now be active. Book your group rate for SAPFM Guestroom Block
2) There is a good barbeque place a couple of blocks away. (It will be the same place that we used the last time we were in Columbus.) About $10 to $15, depending upon inflation.
3) Don’t forget to send me a RSVP email for the meeting, so I can order enough food..
Cheers,
David
1. Open doors at 10:00am
Arrive, relax, have some coffee
2. Introductions and Show & Tell, 11:00am – 12:00pm
The “show and tell” is an ice breaker. Please bring anything you would like to show off. If you have a special piece, a project or even a jig, please bring them. For those who haven’t attended a previous meeting, this is a quick introduction, a display of your skills, interests, projects both past and present, jig, etc. It can even be a request for help in a particular area. After we go around the room, we will break for 30 min. During this break, you can seek out the other members who have similar interest and/or have already built a project/jig you want to build. This break will give you the opportunity to meet and establish a new friendship, pick their brains, and continue communicating with them after the meeting. This is extremely helpful for highly specialized niches, like inlays, marquetry, carving, Bombay chest, etc.
2a) Introductions and Show & Tell, 11:00 - 11:30am
Name, where you live, your past and present projects, classes, and/or your particular interest and your Show & Tell item if you brought one. …
2b) Break to discuss Show & Tell one-on-one, 11:30am-12:00pm
3. Lunch, 12:00 – 1:00pm
4. Demonstrations 1:00pm to 5:00pm
4.a Sharpening V-Chisel and Back-Bend Carving Chisels by Dave Boeff
4.b Powered sharpening system (Veritas Power Sharpener with Tormek attachments) by David Conley
4.c Chair Joinery Slide Show by Dave Boeff
SUNDAY, November 6, 2022
Breakfast (on your own)
5. Demonstrations 8:30am – 12:00pm
5.a Sharpening Card Scraper by Charles Murray
5.b Hammer Veneering by Charles Murray
6. Wrap-up, 12:00 - 12:30pm
Woodcraft – Columbus, Ohio Address:
1077 Bethel Rd
Columbus, OH 43220
(614) 273-0488
HOTEL ARRANGEMENTS (10 minutes from Woodcraft):
Courtyard Columbus Worthington
7411 Vantage Drive
Columbus, OH 43235
(614) 436-7070
Group Name: SAPFM
Group Rate: $ 99.00 + tax
Call to reserve: 1-614-436-7070
Cut-off date to reserve: Cut off Date: October 7, 2022.
Or, book on-line SAPFM Guestroom Block
Cancellation Policy: 48hrs advance notice
1) We have a group reservation at the Courtyard Columbus-Worthington by Marriott Columbus, OH. The cutoff date for the hotel is October 7, 2022. It should now be active. Book your group rate for SAPFM Guestroom Block
2) There is a good barbeque place a couple of blocks away. (It will be the same place that we used the last time we were in Columbus.) About $10 to $15, depending upon inflation.
3) Don’t forget to send me a RSVP email for the meeting, so I can order enough food..
Cheers,
David
Society of American Period Furniture Makers
Ohio River Valley Chapter
AGENDA
SATURDAY, November 5, 2022 Ohio River Valley Chapter
AGENDA
1. Open doors at 10:00am
Arrive, relax, have some coffee
2. Introductions and Show & Tell, 11:00am – 12:00pm
The “show and tell” is an ice breaker. Please bring anything you would like to show off. If you have a special piece, a project or even a jig, please bring them. For those who haven’t attended a previous meeting, this is a quick introduction, a display of your skills, interests, projects both past and present, jig, etc. It can even be a request for help in a particular area. After we go around the room, we will break for 30 min. During this break, you can seek out the other members who have similar interest and/or have already built a project/jig you want to build. This break will give you the opportunity to meet and establish a new friendship, pick their brains, and continue communicating with them after the meeting. This is extremely helpful for highly specialized niches, like inlays, marquetry, carving, Bombay chest, etc.
2a) Introductions and Show & Tell, 11:00 - 11:30am
Name, where you live, your past and present projects, classes, and/or your particular interest and your Show & Tell item if you brought one. …
2b) Break to discuss Show & Tell one-on-one, 11:30am-12:00pm
3. Lunch, 12:00 – 1:00pm
4. Demonstrations 1:00pm to 5:00pm
4.a Sharpening V-Chisel and Back-Bend Carving Chisels by Dave Boeff
4.b Powered sharpening system (Veritas Power Sharpener with Tormek attachments) by David Conley
4.c Chair Joinery Slide Show by Dave Boeff
SUNDAY, November 6, 2022
Breakfast (on your own)
5. Demonstrations 8:30am – 12:00pm
5.a Sharpening Card Scraper by Charles Murray
5.b Hammer Veneering by Charles Murray
6. Wrap-up, 12:00 - 12:30pm
Woodcraft – Columbus, Ohio Address:
1077 Bethel Rd
Columbus, OH 43220
(614) 273-0488
HOTEL ARRANGEMENTS (10 minutes from Woodcraft):
Courtyard Columbus Worthington
7411 Vantage Drive
Columbus, OH 43235
(614) 436-7070
Group Name: SAPFM
Group Rate: $ 99.00 + tax
Call to reserve: 1-614-436-7070
Cut-off date to reserve: Cut off Date: October 7, 2022.
Or, book on-line SAPFM Guestroom Block
Cancellation Policy: 48hrs advance notice