David Conley
Well-known member
SAPFM ? ORV Chapter,
The Fall 2010 Meeting has been set for Saturday and Sunday, August 28 and 29 at Dick Reese?s workshop in Centerville, Ohio (suburb of Dayton, OH).
As usual, I will need a head count of who is planning to attend so that we can get the right amount of food. We are going to try Subways this time
Again, this meeting will be free to all SAPFM dues paying members. The proposed agenda is listed below.
Thanks,
David
Society of American Period Furniture Makers
Ohio River Valley Chapter
Proposed AGENDA ? Fall Meeting
SATURDAY, August 28, 2010
1. Open doors at 10:00am
Arrive, relax, have some coffee
2. Introductions and Show & Tell, 11:00am ? 12:00pm
The ?show and tell? is an ice breaker. Please bring anything you would like to show off. If you have a special piece, a project or even a jig, please bring them. For those who haven?t attended a previous meeting, this is a quick introduction, a display of your skills, interests, projects both past and present, jig, etc. It can even be a request for help in a particular area. After we go around the room, we will break for 30 min. During this break, you can seek out the other members who have similar interest and/or have already built a project/jig you want to build. This break will give you the opportunity to meet and establish a new friendship, pick their brains, and continue communicating with them after the meeting. This is extremely helpful for highly specialized niches, like inlays, marquetry, carving, Bombay chest, etc.
a) Introductions and Show & Tell, 11:00 - 11:30am
Name, where you live, your past and present projects, classes, and/or your particular interest and your Show & Tell item if you brought one. ?
b) Break to discuss Show & Tell one-on-one, 11:30am-12:00pm
Also, we will have another swap meet. If you have got something to sell or trade, please bring it.
3. Lunch, 12:00 ? 1:00pm
We will be getting a Subways Party Sub.
4. Demonstrations
a) Moldings by George Walker, 1:00 ? 3:00pm
b) Develop the agenda items for the next Chapter meeting.
c) Chairs (measurements & layouts, making your own carvings casting of by Jim Conley, 3:00-5:00pm
SUNDAY, August 29, 2010
5. Breakfast (on your own)
6. Roundtable discussion on finishing, 9:00 ? 12:00pm
This is an open discussion on what finishes you use, how you adjust the color, how you tint sap wood, how to age wood, etc ? This discussion is long overdue.
7. Wrap-up, 12:00 - 12:30pm
Send me an Email for DIRECTIONS TO DICK REESE?S WORKSHOP.
HOTEL ARRANGEMENTS:
The Fairfield Inn ? South is located a couple of miles from Dick?s house and adjacent to a large mall. There are 10 rooms for the 28th and 25 rooms reserved for the 29th reserved at the group rate under the name of "SAPFM". The reserves must be made by August 3. Cost is $79.00 + tax.
Fairfield Inn ? South (937) 428-7736
8035 Washington Village
Dayton, Ohio 45458
The Fall 2010 Meeting has been set for Saturday and Sunday, August 28 and 29 at Dick Reese?s workshop in Centerville, Ohio (suburb of Dayton, OH).
As usual, I will need a head count of who is planning to attend so that we can get the right amount of food. We are going to try Subways this time
Again, this meeting will be free to all SAPFM dues paying members. The proposed agenda is listed below.
Thanks,
David
Society of American Period Furniture Makers
Ohio River Valley Chapter
Proposed AGENDA ? Fall Meeting
SATURDAY, August 28, 2010
1. Open doors at 10:00am
Arrive, relax, have some coffee
2. Introductions and Show & Tell, 11:00am ? 12:00pm
The ?show and tell? is an ice breaker. Please bring anything you would like to show off. If you have a special piece, a project or even a jig, please bring them. For those who haven?t attended a previous meeting, this is a quick introduction, a display of your skills, interests, projects both past and present, jig, etc. It can even be a request for help in a particular area. After we go around the room, we will break for 30 min. During this break, you can seek out the other members who have similar interest and/or have already built a project/jig you want to build. This break will give you the opportunity to meet and establish a new friendship, pick their brains, and continue communicating with them after the meeting. This is extremely helpful for highly specialized niches, like inlays, marquetry, carving, Bombay chest, etc.
a) Introductions and Show & Tell, 11:00 - 11:30am
Name, where you live, your past and present projects, classes, and/or your particular interest and your Show & Tell item if you brought one. ?
b) Break to discuss Show & Tell one-on-one, 11:30am-12:00pm
Also, we will have another swap meet. If you have got something to sell or trade, please bring it.
3. Lunch, 12:00 ? 1:00pm
We will be getting a Subways Party Sub.
4. Demonstrations
a) Moldings by George Walker, 1:00 ? 3:00pm
b) Develop the agenda items for the next Chapter meeting.
c) Chairs (measurements & layouts, making your own carvings casting of by Jim Conley, 3:00-5:00pm
SUNDAY, August 29, 2010
5. Breakfast (on your own)
6. Roundtable discussion on finishing, 9:00 ? 12:00pm
This is an open discussion on what finishes you use, how you adjust the color, how you tint sap wood, how to age wood, etc ? This discussion is long overdue.
7. Wrap-up, 12:00 - 12:30pm
Send me an Email for DIRECTIONS TO DICK REESE?S WORKSHOP.
HOTEL ARRANGEMENTS:
The Fairfield Inn ? South is located a couple of miles from Dick?s house and adjacent to a large mall. There are 10 rooms for the 28th and 25 rooms reserved for the 29th reserved at the group rate under the name of "SAPFM". The reserves must be made by August 3. Cost is $79.00 + tax.
Fairfield Inn ? South (937) 428-7736
8035 Washington Village
Dayton, Ohio 45458