Indiana Chapter Spring Meeting Announcement
- Thread starter dsredlin
- Start date
dsredlin
Well-known member
Hello All,
The Indiana Chapter's 2010 Spring Meeting is March 13th at Conner Prairie, located in Fishers, IN. This meeting will be in the "modern shop", although access to the historical shop is available. Directional signs will be posted inside facility parking area.
I will need a "head count" no later than March 1, 2010. This would allow Conner Prairie enough time to make their accomodations.
Agenda Below:
1.) 9:00 am - 9:15 am - Arrive, Greet and Meet
2.) 9:15 am - 9:30 am - Introductions, Chapter Business
3.) 9:30 am - 11 am- Tom Ford, Veneering with Vacuum Bag, Vacuum Pump Construction and demonstration.
4.) 11:00 am- 12:00 pm - David Mikoryak, Discussion regarding Glass Panel Door Construction and Joinery.
5.) 12:00 pm - 1:00 pm - Lunch
6.) 1:00 pm-1:30 pm - Show and Tell
7.) 1:30 pm - 2:30 pm - Justin Kaufman - Discussion on Full Size plans, Planning and Procedure.
8.) 2:30pm - 3:30pm - Dave Redlin - Discussion on Case Carcase Construction and Joinery.
9.) 3:30 pm - 4:00pm - Wrap Up, Discuss Next Meeting.
Due to the amount of information that's going to be covered, we're only planning on a 1-hr lunch break. There are several "fast-food" restaurants within a 5 minute drive from Conner Prairie.
http://www.connerprairie.org/
Please let me know if you have any questions.
Thanks,
Dave Redlin
317-979-1063
This meeting will be free to all SAPFM dues paying members although a small admission fee might be required to enter Conner Prairie.
Go Colts!!
The Indiana Chapter's 2010 Spring Meeting is March 13th at Conner Prairie, located in Fishers, IN. This meeting will be in the "modern shop", although access to the historical shop is available. Directional signs will be posted inside facility parking area.
I will need a "head count" no later than March 1, 2010. This would allow Conner Prairie enough time to make their accomodations.
Agenda Below:
1.) 9:00 am - 9:15 am - Arrive, Greet and Meet
2.) 9:15 am - 9:30 am - Introductions, Chapter Business
3.) 9:30 am - 11 am- Tom Ford, Veneering with Vacuum Bag, Vacuum Pump Construction and demonstration.
4.) 11:00 am- 12:00 pm - David Mikoryak, Discussion regarding Glass Panel Door Construction and Joinery.
5.) 12:00 pm - 1:00 pm - Lunch
6.) 1:00 pm-1:30 pm - Show and Tell
7.) 1:30 pm - 2:30 pm - Justin Kaufman - Discussion on Full Size plans, Planning and Procedure.
8.) 2:30pm - 3:30pm - Dave Redlin - Discussion on Case Carcase Construction and Joinery.
9.) 3:30 pm - 4:00pm - Wrap Up, Discuss Next Meeting.
Due to the amount of information that's going to be covered, we're only planning on a 1-hr lunch break. There are several "fast-food" restaurants within a 5 minute drive from Conner Prairie.
http://www.connerprairie.org/
Please let me know if you have any questions.
Thanks,
Dave Redlin
317-979-1063
This meeting will be free to all SAPFM dues paying members although a small admission fee might be required to enter Conner Prairie.
Go Colts!!
dsredlin
Well-known member
The Indiana Chapter had a great meeting on March 13th. The meeting was at Conner Prairie in Fishers, IN.
We had 12 members attend the meeting in the modern woodworking shop at Conner Prairie. After a short discussion on Chapter business, Tom Ford started his joewoodworker.com inspired vacuum pump/press and demonstrated the technique for using the vacuum press on a few boards. Once he wrapped up, David Mikoryak showed the group how to make period style window muntins with modern router bits. After a break for lunch, Justin Kauffman showed how he draws his full size drawings for all his projects. Dave Redlin wrapped up the demonstrations with a group discussion on Carcase joinery and construction techniques. For show and tell, Sam Rhodes showed his Philadelphia Arm chair in progress, Merrill Brown discussed his Chippendale mirror, inspired by Steve Latta's article in FWW and Justin showed his pilgrim stool, made with green woodworking techniques.
As a wrap up, mid summer dates were discussed for the summer meeting. Information will be posted at a later date on this.
Thanks,
Dave Redlin
Special thanks go out to Conner Prairie, John Weston and Nathan Allen for their generosity and support.
We had 12 members attend the meeting in the modern woodworking shop at Conner Prairie. After a short discussion on Chapter business, Tom Ford started his joewoodworker.com inspired vacuum pump/press and demonstrated the technique for using the vacuum press on a few boards. Once he wrapped up, David Mikoryak showed the group how to make period style window muntins with modern router bits. After a break for lunch, Justin Kauffman showed how he draws his full size drawings for all his projects. Dave Redlin wrapped up the demonstrations with a group discussion on Carcase joinery and construction techniques. For show and tell, Sam Rhodes showed his Philadelphia Arm chair in progress, Merrill Brown discussed his Chippendale mirror, inspired by Steve Latta's article in FWW and Justin showed his pilgrim stool, made with green woodworking techniques.
As a wrap up, mid summer dates were discussed for the summer meeting. Information will be posted at a later date on this.
Thanks,
Dave Redlin
Special thanks go out to Conner Prairie, John Weston and Nathan Allen for their generosity and support.